These DIY Sturdy Planted Posts went together easily and are perfect for the yard! I can already think of a thousand uses for them. Where would YOU use these DIY Sturdy Planted Posts?
DIY Sturdy Planted Posts
Growing up, my parents' yard was always so lush and beautiful. Our home had a pool and I can remember many fun gatherings around it (and in it!). Both my mom and dad worked so hard to keep the yard and patio absolutely lovely. There were lush flowers everywhere and the entire yard was bordered three feet deep with Asian Jasmine, lined with railroad ties to separate the Jasmine from the thick St. Augustine grass. We lived in an older area of Austin and there were beautiful, established trees everywhere (that dropped buckets of leaves into that pool...much to my dad's chagrin). My mom even had flowering, overflowing baskets hanging from limbs of trees. My parents both worked full-time, so looking back, I'm truly amazed they were able to keep up such a beautiful area on their own. I strive to keep up our own yard looking just a little bit as pretty as my parents' did, but our lives are super busy. But, we have worked hard this last year or so to really bring our backyard together...and that hard work has really started to pay off. Because of all of this work, we've truly been enjoying this area more, too.
We've added these DIY sturdy planted posts into some whiskey barrel planters to hang strings of lights all around our firepit area. These types of planted posts would be perfect for mailboxes, hanging baskets, and so much more, too.
See how we made them super sturdy (to withstand crazy Texas thunderstorms) below.
How to Make DIY Sturdy Planted Posts:
To start with, we purchased three large whiskey barrels (they come cut in half). Ours measured roughly 24" across. We also grabbed nine 60-pound bags of cement mix, six large "L" brackets (the kind shelves sit on), three treated-lumber posts, as well some scrap wood from our pile.
We also picked up some of our favorite plants as well as Miracle-Gro Potting Mix and LiquaFeed to make sure our plants get a healthy start.
Reinforcing the Planted Posts
The first step is to reinforce the bottoms of the barrels with some scrap wood pieces, (you'll see why below). We used 1x6 pieces and cut them to fit the bottoms of the barrels. My dad helped me with this part of the project. He loves engineering these types of projects. He's one of those people who makes projects *look* easy.We removed the original reinforcement pieces (pictured above on the left), with a crowbar. Then we screwed our cut 1x6 pieces into place. You'll need two pieces per barrel. This doesn't have to be perfect. These are just used for the brackets to be screwed into...and the brackets are simply to hold the planted posts in place until the cement sets up. So, truly, these do not require any type of perfection.
Placement of Your Sturdy Planted Posts
Position the barrel where you'd like it to go in your yard or garden area. Once the cement is poured, it will be super heavy...movable-ish...but only in a somewhat dire situation (give or take...I mean you could "roll" your planted posts around the yard if you were in a bind, I suppose). Before placing the post into the barrel, attach your two brackets onto adjacent sides of your post (so it can't move either direction once the cement is setting up). We also added the hook to the top of the post before securing it to the bottom of the barrel...but that's just preference. Make sure you're screwing the brackets into the area where the reinforcements have been placed on the bottom of your barrel. Try not to do this portion on a windy day. Before these are secure with cement, they could be a bit dangerous..."falling over" wise.Set Your Planted Posts With Cement
Next, we started pouring the cement into the barrels...one bag at a time. I promise I did not make my dad do all the work, y'all. Just when I had the camera in my hand...wink. We mixed each bag, one at a time.
After getting one bag of dry cement into the barrel, we sprayed it down with water. And used the end of a hoe to start mixing. Honestly, I actually served as the expert sprayer on this project.
After mixing each dry bag with water and getting it to our desired consistency, we'd add another bag on top and repeat the process. Our desired consistency was very brownie-batterish. After each barrel had three bags of mixed cement all ready to go, we let them cure for 48 hours. It's important to watch your weather forecast when planning your planted post project...you want it to stay dry while your posts cure.
Plant Your Sturdy Planted Posts:
Next was the really fun part...planting! We also made sure to drill {somewhat discreet} drainage holes into the sides of the barrel, just above the top of the cement level. Since we covered up the drainage in the bottom of the barrel, we needed to be sure and add these into the sides of the barrel.
Cleaning up the yard for the spring and summer is one of our favorite family projects. This summer, we've gone a bit "bigger" than usual, but it makes it all the more exciting for it to come together.
Every year, we use Miracle-Gro products to make sure our hard work keeps on keepin' on...if you know what I mean. You can grab Miracle-Gro products, as well as other goodies from the Scott's family of products at your local Walmart to make sure your lawn and garden look their absolute best.
This area is looking so colorful with all of these blooms now...can hardly wait to have all of the lights up and a few friends over for some fun backyard time. A full barrel of Miracle-Gro Potting Mix (and cement!) makes the perfect home for our hearty Marigolds.
If we feed our plants with the absolute best products, we'll get their absolute best performance all season long! Plus my kids think this Miracle-Gro LiquiFeed Feeder is so much fun to water with!
Love Planted Posts?
- Check out this Address Number Planted Posts Tutorial from Shanty2Chic.
- This cute bird feeder planted posts station ("Grand Central Feeding Station") from Leanne Wildermuth is so neat!
- If you love our outdoor projects like these DIY Sturdy Planted Posts, be sure to check out our DIY Window Boxes, too (featured in the video below).
This is a sponsored conversation written by me on behalf of Scotts. The opinions and text are all mine.
Where did y'all get the whiskey barrels?
ReplyDeleteThey're from Home Depot! :)
DeleteExcellent job! What type of wood did you use for the posts? I didn't catch that in your article
ReplyDeleteWe just used the treated posts from the lumber yard. Thanks!
DeleteMy apologies for not being specific. Could you give me the measurements for the posts? Thanks for the quick response!
DeleteNo problem. They are 8' tall and they're the standard square post (I believe that's 4"x4").
DeleteThank you!!! I'm going to use your 5 gallon bucket tutorial for my project. Did you use one Quickrete bag per bucket?
DeleteActually each bucket had three bags of the Quickrete. Thanks!
DeleteDo you think 4 of these would be sturdy enough to hold a sail shade?
ReplyDeleteI am honestly not familiar enough with sail shades or their weights or wind, etc.? So, I don't know for sure? I always had lights and heavy hanging baskets on them without issue.
DeleteHi! Do you remember the size of your barrels? 20inch? 25inch? Thank you!
ReplyDeleteOurs were 24" across the top. :)
DeleteWhere did you get those sting lights? Love the shape.
ReplyDeleteI believe they were from Lowe's. :)
DeleteWe live near San Antonio and sometimes we get some serious winds. Have these posts ever fallen due to wind?
ReplyDeleteHi Sheen-- We never had any problems with them (we are just an hour and a half north of you). We no longer live in this home, but for the couple of years we were in this home, there was never a wind incident. We have relatives in San Antonio who followed our tutorial and built these, too, and have never had an issue. Hope this helps!
DeleteThank you! I am going to give this a try. I love this!
DeleteHope they turn out great for you!
DeleteDo you think it would be sturdy enough with a taller narrower whiskey barrel? or does it need the wide bottom?
ReplyDeleteGoodness...I just worry they could be too top heavy? That is a tough one, but to be safe, I'd stick with the "fat" ones.
Deletedid you have to add any drainage holes on the side for your planting part?
ReplyDeleteYes, we drilled holes just above the cement area for drainage. You can see the photo in the post of my son drilling them. They worked out perfectly.
Deletewow.! It's great idea.
ReplyDeleteThanks, Kathy!
DeleteHow did you provide electricity for the string lights?
ReplyDeleteYour website is unusable on mobile. It keeps overlaying video ads and when I click close it opens one of your images in zoom mode and when I go back it starts the ad again. Very disappointing that I can't follow the tutorial because of this.
ReplyDeleteOh no! I will look into that. Thank you for letting me know, Chris! If you are able, please try visiting from a laptop or desktop to see if that fixes the problem. Thanks so much for stopping by!
DeleteI’ve been researching how to make this for our backyard. This is the best tutorial I’ve found so far. Can’t wait to make this!
ReplyDeleteHi Lisa! Thank you so much for stopping by and sharing such sweet words with me! I hope you will come back and share your finished project with me! Wishing you and yours a wonderful 4th of July holiday! <3
DeleteDo you think these would be sturdy enough to hold a hammock between two of them?
ReplyDeleteHey Michelle! I think it would depend on how much weight you put in the planters. It would be an awesome idea to try though!! I think it would work!
DeleteMichelle, I was wondering the same thing. :)
ReplyDeleteI think it would work as long as you had enough concrete in the bases to support the weight of the person using the hammock!
Delete